ATAGO's Polarimeters measure the optical rotation of optically active substances such as saccharide, ascorbic acid, sodium glutamate and others.

Automatic Polarimeter / Saccharimeter SAC-i

Here at last - the product of our uncompromising pursuit of ultimate usability.
• Measurement stability in 13 seconds (4 seconds in the high-speed & consecutive measurement mode)
• Resolution of up to 3 decimal places
• Repeatability of ±0.003° Angle of Rotation and ±0.009°Z
• Up to 999 automatic consecutive measurements followed by average value display
• Sleep & timer feature to take measurement later at specified time
• Improved usability with the use of touch screen technology
• Connectivity to RX Digital Refractometers for automatic purity measurement
This SAC-i has been tested and approved by CONSECANA, the most eminent authority on sugar and ethanol production in the State of São Paulo, Brazil.


Enlargement
Quantity
>about the icons Automatic Temperature Compensation Can be connected to a printer RS-232C Interface Digital display AC outlet (AC100 to 240V)
Model SAC-i Cat.No. 5951
Measurement Scales Angle of Rotation, International Sugar Scale (without temperature compensation), International Sugar Scale (with Automatic Temperature Compensation), Specific Rotation, Concentration, Purity, and Angle of Rotation (Temperature Compensation of Quartz Plate)
Measurement Range Angle of Rotation -89.9999 to +90.0000° or -360 to +360°
International Sugar Scale -259 to +259°
Resolution Angle of Rotation 0.0001° International Sugar Scale 0.0001°Z
Measurement Accuracy Angle of Rotation Displayed value
±0.002°(-5.0000 to +5.0000°)
±0.005°(-45.014 to -5.0001°,+5.0001 to +45.0140°)
International Sugar Scale Displayed value ±0.015°Z (-130 to +130°Z)
(With a Standard Quartz Plate)
Repeatability ±0.003° Angle of Rotation and ±0.009°Z
Temperature compensation range for International Sugar Scale 10 to 40℃ Display Panel 7.5 inch color LCD (touch screen)
Light source LED Measurement wavelength 589nm (equivalent to the sodium-D line spectrum)
Output Digital Printer DP-63 or
DP-AD (sold separately),
Output method : RS-232C (9 pin D-Sub male connector)
USB flash drive and PC - USB
Observation tube included Observation tubes (100mm(5mL),200mm(10mL)) Power supply AC100 to 240V, 50/60Hz
Dimensions and weight 60×36.5×21cm, 20.0kg    
Optional Digital Printer DP-63 : Cat.No.3118
Digital printer DP-AD : Cat.No.3123
• Small volume Tube 10mm 1mL: RE-72042
• Observation tube 50mm long OT-50(I) 2.5mL : RE-72080
• Observation tube 100mm long OT-100(I) 5mL : RE-72078
• Observation tube 200mm long OT-200(I) 10mL : RE-72079
• Jacketed flow tube with funnel 100mm : RE-72113
• Jacketed flow tube with funnel 200mm : RE-72114
• Unjacketed flow tube with funnel 100mm : RE-72037
• Unjacketed flow tube with funnel 200mm : RE-72038
• Unjacketed small volume observationtube 10mm long : RE-72042
• Jacketed flow tube 50mm : RE-72110 (With water jacket)
• Jacketed flow tube 100mm : RE-72111 (With water jacket)
• Jacketed flow tube 200mm : RE-72112 (With water jacket)
Quartz control plate 34° (100°Z) : RE-72045
Quartz control plate 17° (50°Z) : RE-72044
Quartz control plate 8° (25°Z) : RE-72043
Quartz Control Plate -34°(-100°Z) : RE-72050
Quartz Control Plate -17°(-50°Z) : RE-72049
Quartz Control Plate -8°(-25°Z) : RE-72048
• Unjacketed Flow Tube (Glass) 50mm/4.5mL : RE-72051
• Unjacketed Flow Tube (Glass) 100mm/9mL : RE-72052
* Calibration Certificate : Contact an ATAGO representative for details.
Purchase a quartz plate and a polarimeter as a set and receive a discount (for details, please contact the ATAGO sales department).
Parts Printer paper (regular) for DP-63 : RE-8412
Printer paper (long-term storage) for DP-63 : RE-8414
Printer paper for DP-AD : RE-89403
Ribbon cassette for DP-AD : RE-89402

This SAC-i has been tested and approved by CONSECANA, the most eminent authority on sugar
and ethanol production in the State of São Paulo, Brazil.


sac

  Catalog Download
Go to the product search GO TOP

Automatic Polarimeter / Saccharimeter SAC-i 589/882

High Performance Sugar Analysis, Now Easier Than Ever. It has become common that dark color - raw sugar samples are measured at 882nm without decolorization treatment.
SAC-i 589/882 can measure samples at both 589nm and 882nm by changing the optical units.


Enlargement
Quantity
>about the icons Automatic Temperature Compensation Can be connected to a printer RS-232C Interface Digital display AC outlet (AC100 to 240V)
Model SAC-i 589/882 Cat.No. 5952
Scale Angle of Rotation,
International Sugar Scale (without temperature compensation),
International Sugar Scale (with Automatic Temperature Compensation)
Measurement Readings Angle of Rotation
International Sugar Scale (without temperature compensation)
International Sugar Scale (with Automatic Temperature Compensation)
Specific Rotation
Concentration
Purity
User scale
Angle of Rotation (Temperature Compensation of Quartz Plate)
Temperature(°C / °F)
Measurement Range Angle of Rotation:-89.9999 to +90.0000°and -360.0000 to +360.0000°
International Sugar Scale : -259.0000 to +259.0000°Z
Resolution Angle of Rotation : 0.0001°
International Sugar Scale : 0.0001°Z
Measurement Accuracy 589nm:
Angle of Rotation :
±0.002°(-5.0000 to +5.0000°)
±0.005°(-45.014 to -5.0001°,+5.0001 to +45.0140°)
International Sugar Scale :±0.015°Z (-130.0000 to +130.0000°Z)
Other ranges Angle of Rotation :±0.01°
International Sugar Scale :±0.03°Z

882nm:
Angle of Rotation :±0.005°(-19.3 to +19.3°)
International Sugar Scale :±0.015°Z (-130.0000 to +130.0000°Z)
Other ranges Angle of Rotation :±0.01°
International Sugar Scale :±0.07°Z
Temperature compensation range 10 to 40℃ Ambient Temperature Use the instrument where the temperature is between 10 to 40°C
Temperature display accuracy ±0.2 °C Display Panel 7.5 inch color LCD (touch screen)
Light source LED:
589nm interference filter,
882nm interference filter
Prism Glan-Taylor Prism
Output Digital Printer DP-63 or
DP-AD (sold separately), USB flash drive and PC - USB
Output method : RS-232C (9 pin D-Sub male connector)
USB flash drive and PC - USB
Measurement Wavelength 589nm (equivalent to the sodium-D line spectrum)
882nm (infrared nearby)
Power supply AC100 to 240V, 50/60Hz
Included Accessories Software, PolariSoft Observation tube included Observation tubes (100mm(5mL), 200mm(10mL))
Dimensions & Weight 60x36.5x21cm, 20.0kg Power consumption 140VA
Output terminals Digital Printer DP-63 or
DP-AD(sold separately),
Output method : RS-232C(9 pin D-Sub male connector)
USB flash drive and PC - USB
Optional Digital Printer DP-63:Cat.No.3118
Digital printer DP-AD:Cat.No.3123
• Small volume Tube 10mm 1mL: RE-72042
• Observation tube 50mm long OT-50(I) 2.5mL : RE-72080
• Observation tube 100mm long OT-100(I) 5mL : RE-72078
• Observation tube 200mm long OT-200(I) 10mL : RE-72079
• Jacketed flow tube with funnel 100mm : RE-72113
• Jacketed flow tube with funnel 200mm : RE-72114
• Unjacketed flow tube with funnel 100mm : RE-72037
• Unjacketed flow tube with funnel 200mm : RE-72038
• Unjacketed small volume observationtube 10mm long : RE-72042
• Jacketed flow tube 50mm : RE-72110 (With water jacket)
• Jacketed flow tube 100mm : RE-72111 (With water jacket)
• Jacketed flow tube 200mm : RE-72112 (With water jacket)
Quartz control plate 34° (100°Z) : RE-72045
Quartz control plate 17° (50°Z) : RE-72044
Quartz control plate 8° (25°Z) : RE-72043
Quartz Control Plate -34°(-100°Z) : RE-72050
Quartz Control Plate -17°(-50°Z) : RE-72049
Quartz Control Plate -8°(-25°Z) : RE-72048
• Unjacketed Flow Tube (Glass) 50mm/4.5mL : RE-72051
• Unjacketed Flow Tube (Glass) 100mm/9mL : RE-72052
* Calibration Certificate : Contact an ATAGO representative for details.
Purchase a quartz plate and a polarimeter as a set and receive a discount (for details, please contact the ATAGO sales department).
Parts Printer paper (regular) for DP-63 : RE-8412
Printer paper (long-term storage) for DP-63 : RE-8414
Printer paper for DP-AD : RE-89403
Ribbon cassette for DP-AD : RE-89402
  Go to the product search GO TOP

Automatic Polarimeter AP-300

Our AP-300 has received
 2003  “Itabashi Technology Gold Prize”

The AP-300 fully automatic polarimeter measures a sample easily by setting the observation tube ( filled with a liquid sample ) in the sample chamber and pressing START.
Digitally displayed measurement values are large and easy to read. The AP-300 generally used in pharmaceutical, perfume, cosmetic, industrial, chemical, and food factories is the best for measuring the angle of rotation. In addition, the built in International Sugar Scale is used widely in sugar factories.
Software, PolariSoft is also available to support customer's FDA 21 Part 11 compliance.


Enlargement
Quantity
Online Store
Video Manual Available
>about the icons Automatic Temperature Compensation Can be connected to a printer RS-232C Interface Digital display AC outlet (AC100 to 240V)
Model AP-300 Cat.No. 5291
Measurement Scales Angle of Rotation,
International Sugar Scale (without temperature compensation),
International Sugar Scale (with Automatic Temperature Compensation)
Measurement Readings Angle of Rotation,
International Sugar Scale (without temperature compensation),
International Sugar Scale (with Automatic Temperature Compensation),
Specific Optical Rotation, Concentration, and Purity
Measurement Range Angle of Rotation
-89.999 to +89.999°
International Sugar Scale
-130.000 to +130.000°Z
Minimum Indication Angle of Rotation 0.001°
International Sugar Scale
0.001°Z
Measurement Accuracy Angle of Rotation
   Displayed value    ±0.01° (- 35.00 to + 35.00° )
   Relative precision ±0.2% (- 35.01 to - 89.99° , + 35.01 to + 89.99° )
International Sugar Scale
   Displayed value    ±0.03°Z (- 101.00 to + 101.00°Z )
   Relative precision ±0.2% (- 130.00 to - 101.01°Z , + 101.01 to + 130.00°Z )
( Checked by reading a standard Quartz Plate )
Temperature 10.0 to 30.0° C
Temperature accuracy : ±0.5° C
Temperature resolution : 0.1° C
Temperature correction range for International Sugar Scale 18.0 to 30.0° C Manual Calibration Enables manual calibration by measuring a standard Quartz Plate
Light source white LED Measurement Wavelength 589nm (equivalent to the sodium-D line spectrum)
Display Panel Color LCD with backlight Power Supply AC100V to 240V 50/60Hz
Output Terminals Digital Printer DP-63 or DP-AD  ( Optional )
• RS-232C
Power Consumption 65VA Accessories 100mm (5mL), 200mm (10mL) Observation tube (1each)
Optional Digital Printer DP-63 : Cat.No.3118
Digital printer DP-AD : Cat.No.3123
• Small volume Tube 10mm 1mL: RE-72042
• Observation tube 50mm long OT-50 (A) : RE-72056
• Observation tube 100mm long OT-100 (A) : RE-72054
• Observation tube 200mm long OT-200 (A) : RE-72055
• Jacketed flow tube 100mm : RE-72034
• Jacketed flow tube 200mm : RE-72035
• Jacketed flow tube 50mm : RE-72036
• Jacketed flow tube with funnel 100mm : RE-72033
• Jacketed flow tube with funnel 200mm : RE-72032
Quartz control plate 34° (100°Z) : RE-72045
Quartz control plate 17° (50°Z) : RE-72044
Quartz control plate 8° (25°Z) : RE-72043
Quartz Control Plate -34°(-100°Z) : RE-72050
Quartz Control Plate -17°(-50°Z) : RE-72049
Quartz Control Plate -8°(-25°Z) : RE-72048
• Unjacketed Flow Tube (Glass) 50mm/4.5mL : RE-72051
• Unjacketed Flow Tube (Glass) 100mm/9mL : RE-72052
* Calibration Certificate : Contact an ATAGO representative for details.
Purchase a quartz plate and a polarimeter as a set and receive a discount (for details, please contact the ATAGO sales department).
Parts • Deck glass : RE-6712
• Rubber packing for observation tube : RE-6713
• Ring nut for observation tube : RE-6714
• Light source unit : RE-74806
Printer paper (regular) for DP-63 : RE-8412
Printer paper (long-term storage) for DP-63 : RE-8414
Printer paper for DP-AD : RE-89403
Ribbon cassette for DP-AD : RE-89402
Dimensions & Weight 48.5×28.5×17.5cm, 14.4kg (Main Unit only)
  Catalog Download
Go to the product search GO TOP

Special Package ( Recommended for sugar industry )

ATAGO has prepared 2 different AP-300 packages for the sugar industry. Users have a choice between 2 types: Temperature Controlled Type A and Temperature Compensation Type B. The AP-300 comes with Automatic Temperature Compensation for International Sugar Scale. A Circulating Constant Temperature Bath is not necessary when the temperature compensation function is used or when the AP-300 is used in a temperature-controlled room.


Enlargement
>about the icons Automatic Temperature Compensation Can be connected to a printer RS-232C Interface Digital display AC outlet (AC100 to 240V)
Model Type A
Temperature Controlled
Type B
Temperature Compensation
Cat.No.
5296 5297
Package Contents

• AP-300
• Jacketed flow tube with funnel
(200mm - approximate volume 15mL)
* Circulating Constant Temperature Bath sold separately.

• AP-300
• Unjacketed flow tube with funnel
(200mm - approximate volume 15mL)

Confirm Quotation
Request
Quantity
Online Store
Quantity
Online Store
  Catalog Download
Go to the product search GO TOP

Special Package ( Recommended for pharmaceutical industry )

AP-300 package include a GMP and GLP compliant Quartz Control Plate for calibration and a Digital Printer DP-AD (regular paper) for data recording.


Enlargement

>about the icons Automatic Temperature Compensation Can be connected to a printer RS-232C Interface Digital display AC outlet (AC100 to 240V)
Model Type D
Without Temperature Controlled
Cat.No.
5295
Package Contents

• AP-300
• Quartz Control Plate (8°, 17°, or 34°)
• Digital printer DP-AD
• Printer paper for DP-AD
• Ribbon cassette for DP-AD

Confirm Quotation
Request
Quantity
Online Store
  Go to the product search GO TOP

Digital Printer DP-63

The DP-63 is a printer for Automatic Polarimeter AP-300. It automatically prints out Angle of rotation, International sugar scale, Specific optical rotation, Concentration, Purity, Length of observation tube, Measurement temperature, Sample number Date, Month, Year and Time.


Enlargement
Quantity
Model DP-63 Cat.No. 3118
Printing Method Thermal dot printing Power Supply AC adapter ( Input voltage : AC100 to 240V )
Power Consumption 13VA Dimensions & Weight 17×16×7cm, 580g
(Main Unit only)
Optional * Calibration Certificate : Contact an ATAGO representative for details.
Parts Printer paper (regular) for DP-63 : RE-8412
Printer paper (long-term storage)for DP-63 : RE-8414
  Go to the product search GO TOP

Digital printer DP-AD

The DP-AD is a printer for Automatic Polarimeter AP-300. It automatically prints out Angle of rotation, International sugar scale, Specific optical rotation, Concentration, Purity, Length of observation tube, Measurement temperature, Sample number Date, Month, Year and Time.The DP-AD uses regular rolled plain paper (not thermal).


Enlargement
Quantity
Model DP-AD Cat.No. 3123
Printing method Impact dot printing Power Supply From AC adapter ( Input voltage:AC100 to 240V )
Power consumption 7VA Dimensions & weight 11×18×9cm, 470g
(Main Uint only)
Optional * Calibration Certificate : Contact an ATAGO representative for details.
Parts Printer paper for DP-AD : RE-89403
Ribbon cassette for DP-AD : RE-89402
  Go to the product search GO TOP

Polarimeter POLAX-2L

Polarimeter, which is known as an optical rotation meter, is an instrument to measure optical rotation of "optically active matter" such as saccharin, ascorbic acid and sodium glutamate.


Enlargement
Quantity
Online Store
>about the icons Digital display AC outlet (AC100 to 240V)
Model POLAX-2L Cat.No. 5223
Measurement Range Angle of rotation :
-179.95° to +180.00°
International sugar scale
-130.0 °Z to +130.0 °Z
Minimum Indication Angle of rotation 0.05°
International sugar scale
0.1°Z
Measurement Accuracy Angle of rotation ± 0.10°
International sugar scale
±0.3°Z
Measurement temperature range 5 to 40°C
Light Source LED with interference filter Measurement Wavelength 589nm (equivalent to the sodium-D line spectrum)
Accessories Observation tubes : 100mm tube and 200mm tube / each
Power Supply AC100 to 240V 50/60Hz Dimensions & Weight 43×22×30cm, 10.3kg
(Main Unit only)
Operation switches R ( + ) = Right rotation switch : Rotates the analyzer slowly to the right.
L ( - ) = Left rotation switch : Rotates the analyzer slowly to the left.
temp = Shift / Temp switch : Pressing this switch simultaneously with either ( + ) switch or the ( - ) switch will provide a faster rotation ( in the shift mode ).
* When this switch is pressed for 2 seconds or more, the temperature of the sample chamber is indicated on the display panel (until the switch is released from pressing).
Optional Quartz control plate 34° (100°Z) : RE-72045
Quartz control plate 17° (50°Z) : RE-72044
Quartz control plate 8° (25°Z) : RE-72043
Quartz Control Plate -34°(-100°Z) : RE-72050
Quartz Control Plate -17°(-50°Z) : RE-72049
Quartz Control Plate -8°(-25°Z) : RE-72048
• Unjacketed Flow Tube (Glass) 50mm/4.5mL : RE-72051
• Unjacketed Flow Tube (Glass) 100mm/9mL : RE-72052
* Calibration Certificate : Contact an ATAGO representative for details.
"Buy Together Discount” available for Quartz control plates.
Contact ATAGO for more details.
Parts • Observation tube 50mm long OT-50 (P) 2.5mL : RE-6722
• Observation tube 100mm long OT-100 (P) 5mL : RE-6720
• Observation tube 200mm long OT-200 (P) 10mL : RE-6721
• Small volume tube 100mm long OT-100 (M) 1mL : RE-6723
• Deck glass : RE-6712
• Rubber packing for observation tube : RE-6713
• Ring nut for observation tube : RE-6714
• Rubber packing for small volume tube : RE-6715
• Ring nut for small volume tube : RE-6717
• Midget fuse (1A) : RE-5784
  Catalog Download
Go to the product search GO TOP