In-line Refraktometer PRM-100α

The unit measures the refraction of light generated between the prism surface and a liquid sample. The PRM-100α is upgraded from the PRM-85 in the following aspects:
• Wider than ever 0.0 to 100.00% Brix range
• Improved measurement accuracy: Brix ±0.05%, nD ±0.00010
• Two options for setting the minimum indication decimal place
• Simple two-piece construction: detection section and operation display section
• Easy-to-read color display panel.
Simply attach the unit to a piping system to monitor food or beverage production, pharmaceutical production, industrial fluid, washing devices, dilution/mixing devices, etc. Continuously monitor water content and mixing ratio with successive measurements of refractive index, Brix, or concentration.
*The prism is specially designed to prevent solid materials from collecting on the surface, even after extended periods of use.

Quantitat

>Piktogrammerklärung Modell PRM-100α Cat.No. 3574 Meßbereich Brechungsindex (nD) von 1.32000 bis 1.55700 Brix von 0.00 bis 100.00% Minimum Anzeige Brechungsindex (nD) 0.0001 or 0.00001 Brix 0.1% or 0.01% (by selection) Meßgenauigkeit Brechungsindex ±0.00010 Brix ±0.05% Meßtemperatur 5 to 100°C (Clean-in-process (CIP) up to 130°C for no more than 30 minutes) Output method RS-232C ADC 4 bis 20mA Stromversorgung AC 100 bis 240V, 50 / 60Hz Alarm Ausgang Open-collector output for high and low limit settings (alarm output) Internationale Schutzkategorie Detection section IP66, Calculation Display section IP65 Optional * Calibration Certificate : Contact an ATAGO representative for details. Maße und Gewicht Erfassungssektion : 10.8 × 26.6 × 10.8cm, 3.3kg Berechnungs-Anzeigen Teil : 19.2 × 10 × 24cm, 3.3kg

Katalog Download (nur in Englisch)