Automatic CO2 Brix Monitor
| JP | 1566485, 1566486 |
| TW | D186342, D186343 |
| CN | ZL 2017 3 0023745.4 |
| EN | US D820702S, US D802703S |
| KR | 30-0917570, 30-0917566 |
| EUIPO | 003665546-0001, 003665546-0002 |
Traditionally, the amount of dissolved carbon dioxide is measured using a methodology commonly called "manual shaking" (aka piercing device) where a container with pierced hole is shaken vigorously in a metal frame.
It requires strenuous physical exertion of shaking a 2L bottle and a metal frame, which weighs 8.4lbs/3.8kg in total. The CooRe was developed to simplify this task as much as possible.
CooRe is the world's first all-in-one dissolved carbon dioxide monitor that features three functions, piercing a hole in the container (piercing), measuring dissolved carbon dioxide and concentration in a single measuring device.
CooRe can be operated by AC adapter or battery, which makes it portable to carry it on site, labs, or anywhere to take measurements. The weight of the instrument is 26lbs/12kg which is half the weight of traditional gas volume testers (66lbs/30kg).
CAll CooRe takes is the press of button after the bottle is set. Including the time it takes to set up the container, it requires only 1 minute 30 seconds to measure. With auto measurement, no tedious post measurement calculation is needed. (*Equipped with user scale function.)
*User scale function…
Using the preexisting and current data obtained by "CooRe", a calibration curve can be created and a coefficient can be programmed. Measurement values are automatically computed based off the past data, which means no stored data is wasted.
Refractometer technology that ATAGO cultivated for many years is incorporated into this gas volume meter. Two types of measurements can be measured at once which contributes to improved work efficacy.
To measure, it only requires 100mL of sample.
If the capacity is that of the common soda bottle, all containers can be measured.
"Piercing" refers to when a tube is inserted to a container.
This instrument allows anybody to pierce any type of bottles smoothly, whether can or bottle. Moreover, it is equipped with a cover to prevent liquid from scattering when a bottle is removed from the instrument.
Many of the gas volume meters are manufactured overseas. "CooRe" is made in Japan. ATAGO will provide a full use of the expert technique that ATAGO cultivated in a refractometer for 70 years. In the event that any servicing or repair is required, please contact ATAGO.
1.Set a sample
2.Push down the lever to pierce a bottle
3.Press a button to start measuring
| Model | CooRe |
|---|---|
| Cat.No. | 9332 |
| Measurement item | CO2 Concentration,Brix,Pressure,Temperature |
| Range | Brix : 0.00 to 20.00 ％ CO2 Concentration : 0.000 to 12.000 vol. : 0.000 to 24.000 ×10-6 kg/cm3 : 0.000 to 24.000 g/L Pressure : 0.00 to 10.00 bar : 10 to 10000 mbar : 0.000 to 145.000 psi : 0.000 to 1.000 MPa : 0 to 1000 kPa Temperature : 0.0 to 30.0 ℃ : 32.0 to 86.0 °F : 273 to 303 K |
| Accuracy | Brix : ±0.05％ Pressure: ±1.0％（at F.S. 20℃） Temperature: ±1℃ |
| Temperature compensation | Brix : 5.0 to 30.0℃ CO2 : 0 to 25℃ |
| Sample Volume | 100mL |
| International Protection Class | IP65 *Applicable only if the USB terminal cover is on and power terminal cover is on (or AC power is connected). |
| Dimensions & Weight | Approx. 405x450x210mm 29lbs/13kg |
| Output | USB memory |
· Lithium-ion Battery : RE-74840
· Pulp Filter Unit : RE-79424
· Filter cartridges(Pulp Filter Unit) : RE-79425
· Desiccant(100g) : RE-99440
· Screw set for Back Cover : RE-99441
· Extension drain tube : RE-78068
· CooRe Grease shaft : RE-99442
Automatic CO2 Brix Monitor CooRe
| Model | CooRe 3L |
|---|---|
| Cat.No. | 9334 |
| Measurement item | CO2Concentration Brix,Pressure,Temperature |
| Range | Brix : 0.00 to 20.00 ％ CO2 Concentration : 0.000 to 12.000 vol. : 0.000 to 24.000 ×10-6 kg/cm3 : 0.000 to 24.000 g/L Pressure : 0.00 to 10.00 bar : 10 to 10000 mbar : 0.000 to 145.000 psi : 0.000 to 1.000 MPa : 0 to 1000 kPa Temperature : 0.0 to 30.0 ℃ : 32.0 to 86.0 °F : 273 to 303 K |
| Accuracy | Brix (Absolute value) : ±0.05％ Pressure: ±1.0％（at F.S. 20℃） Temperature: ±1℃ |
| Temperature compensation | Brix : 5.0 to 30.0℃ CO2 : 0 to 25℃ |
| Sample temp. | 0 to 30℃（Guaranteed accuracy range: 5.0 to 25.0 ℃） |
| Sample Volume | 100mL |
| International Protection Class | IP65 *Applicable only if the USB terminal cover is on and power terminal cover is on (or AC power is connected). |
| Dimensions & Weight | Approx. 405(W)×210(D)×515(H)mm 29lbs/13kg |
| Output | USB memory |
· Lithium-ion Battery : RE-74840
· Pulp Filter Unit : RE-79424
· Filter cartridges(Pulp Filter Unit) : RE-79425
· Desiccant(100g) : RE-99440
· Screw set for Back Cover : RE-99441
· Extension drain tube : RE-78068
· CooRe Grease shaft : RE-99442
Automatic CO2 Brix Monitor CooRe 3L
